This tutorial is being done on Windows 8, it is confirmed to work on Windows XP [home, pro], Windows Vista [all versions], Windows 7 [all versions], and of course Windows 8 [home, pro, enterprise]. This tutorial requires two pieces of malware/spyware free software to be downloaded and installed.
Tutorial Difficultly: Medium
You ever buy that one DVD that was easily the best movie you’ve ever seen? You ever been scared the dog or kids might scratch it? You ever wanted to watch that movie on the go? Well this is your tutorial.
Step 1: Prepare for the job
[Note: The legal status of DVD Decrypter has always been in question. As long as the products produced with this software are kept to one’s self and are not distributed, sold or uploaded, using this program is completely legal. This should only be for DVDs you have purchased and fully own, I do not condole piracy, this tutorial is for educational purposes only.]
Step 2: Create an ISO Image of your DVD
We will use this program to create an ISO image of your DVD. The image will come into use in the following steps. A log window will appear below the window shown in the picture above, this can be closed out. It is a log window that keeps track of what the DVD Decrypter has done, it is not necessary for anything we’re doing.
Look towards the top of the main window, click on mode and from the drop down menu that appears follow to ISO and select read.
Next select your DVD drive in which you put your DVD into. If you only have one DVD drive, you don’t need to worry about this, if you do have more than one select the appropriate one. In the picture above, the area to select this is highlighted in red. You will know you will have selected the right one by looking at the area high lighted in green, if these icons are in color, you’ve picked the right one. They will appear black out if not.
In the area high lighter in blue, you can see a folder icon with a magnifying glass on it. Click here to name your output file and choose the folder where you want our output ISO file to go. Remember where you put this file, you will need it later. Note, this file will be anywhere from 3gbs to 8gbs in size! Once ready, click the icons in the are highlighted in green in the picture above to begin the process.
You should now be viewing the window pictured above. Here you can find all the details of the ISO being produced, including a remaining time and progress bar until the finish. Depending on the specs of your computer, this can take anywhere from a few minutes to a few hours to complete! For best performance and speed, let your computer sit on this job, come back and check in at the estimated time completion.
Step 3: Exit DVD Decrypter
Once finished, if your speakers are on, you should hear a monkey-like jingle alerting you that the job is done. Click OK and close out DVD Decrypter. You may see one of the two alerts, or both, pictured below. Don’t worry, these are normal, simply close them all out until they don’t redisplay again.
Step 4: Load your ISO into Handbrake
Open Handbrake. Here we will turn that ISO file into a file that can be read on phones, or other media devices. You will now need to load the ISO file that DVD Decrypter made. To do so, look near the top left of the Handbrake window, click source, and then open file. Now select the ISO file from where you saved it, and wait a few seconds for it be analyzed and loaded into the program. Use the picture below, for reference if needed.
After it has been loaded, you need to select the title, angle, and chapters, you want in the final outcome. You will also need to select where you want the final outcome file to go. To select all these option, look below where the source button was located. All in one row, you will see the title, angle, and chapters options. Below these options, you will see a Destination bar where you can click Browse to select where you want it to go. Refer to the picture below, for the location if you’re having trouble finding these options.
For the title option, select the longest title that comes from the drop down menu. This is the actual movie or video from the DVD. It may not always be title 1, so make sure to pick the one that coordinates with the approximate run time of your DVD.
Angle should be left at 1.
By default the Chapter settings should be set when you select the title. Otherwise Chapters should be the first chapter to the last one of your DVD. In this case the first is 1 and the last is 28. This may differ in your case, but 1 is usually always 1 and the last number always varies. You may not need to change anything here.
Step 5: Select Resolution of outcome file
Before we create the final file, we need to set the resolution of it. This basically means the size and quality of the final video. The MAXIMUM resolution of ALL DVDs is 720×480 This means you can not change the resolution any higher than this. Skip to alternative Step 5 if you want to use your file on an iDevice or Android device. Please refer to the image below.
The area to look at is high lighted in red. Look towards the top of the high lighted box, and find container right next to it there will be a box that you can click and will become a drop down menu. Here you can select what file type you want for your final video file. Note, MP4 is very universal, it can be played almost anywhere, it is also the file type that has to be imported into iTunes to be used on an iDevice.
Next to that, you will see a large file size box, click here if you don’t care about the final size of your video. The larger the size, the better quality in this case. You will also find a web optimized and iPod 5G support boxes that can be ticked as well, if you ant those options.
Below you will find a Size section. Here you can change the resolution of your video. Remember that 720×480 is the highest possible resolution for DVD! Once ready skip alternative Step 5 and go to step 6.
alternative Step 5: Set the Resolution of the outcome file for iDevices or Android Devices
Refer to the image below
If you’re going to be using this DVD Rip on and iDevice or Android device, Handbrake has go you all hooked up. In the high lighted area in the picture above. You can see options for preset resolutions that will get you going. All you need to do is click on your desired one and you’re good to go! Note, some of these devices such as the iPhone 5 have a higher screen resolution than that of a DVD. This is not a bad thing, you will just not receive the best possible quality of your device’s resolution, but it will still be view able.
Step 6: Start your the process
Now with all your settings ready, look near the top left of the windows and select the green start button to start the converting process. Refer to the picture below if needed.
Depending on the specs of your computer, this can take anywhere from a few minutes to a few hours to complete! For best performance and speed, let your computer sit on this job, come back and check in at the estimated time completion.
Progress information can be seen towards the bottom of the program’s window, it is high lighted in the picture below, ignore the highlighting to the right of the image.
Once done, exit the program.
Step 7: View your file
If you’ve made it this far, congrats! You’ve probably have a digital version of one of your favorite movies! To view it, locate it and open it in your favorite player! Note, some players can not open all video files. I recommend VLC Media Player for all your viewing needs.
If you want your file on your iDevice simply open iTunes and drag the video file directly inside it. All that’s left is to sync with your device.
If you want your file on your Android device, connect your device to your computer, and set it to mass storage on your device. (This should come up upon connecting your device) Drag and drop the video file onto your device’s storage and you’re good to go! I recommend MX PLayer for all your viewing needs on Android.
You can also transfer this video onto a flash drive, portable HDD, or leave it on your computer.
For tutorials and more come back to AnG Tech!